Roofing discussions and local services.
Discussion activity
Topics and replies this member has contributed.
RE: Keeping algae off Atlas shingles: My quick hack
I get why folks go for the dish soap and broom method - it's cheap, and you don't have to worry about harsh chemicals. But honestly, after a couple seasons of trying that routine, I started questioning if it was worth th...
RE: Feeling good about my switch to composite tiles - worth it?
Ventilation really is one of those things you don’t appreciate until you’ve lived through a summer without it. We did the composite tile swap a couple years back and, like you, I figured that alone would help with the he...
RE: Anyone else tried those heated driveway mats?
I looked into these last year after my back started acting up - figured anything to cut down on shoveling was worth a shot. Ended up passing because the battery models seemed pricey for what you get, especially if you fa...
RE: Swapping Out Roof Vent Boots With The Seasons - Worth The Hassle?
I’m in the same boat, honestly. When I bought my place (northern Indiana, so pretty similar weather-wise), I was all set to go with metal boots because that’s what my dad always swore by. But after pricing everything out...
RE: Roof upkeep through the seasons - did you see this?
I actually swapped out the old silicone for rubberized boots on two of my vent pipes about three years ago. Our winters here are brutal - lots of freeze/thaw cycles - and I was tired of re-caulking every spring. The boot...
RE: how long should we honor price quotes?
I’m right there with you on the “surprises are for birthdays” thing. I’ve had my fair share of home project curveballs, and it’s always the budget that takes the hit. Last year, I got a quote for a new fence - nothing fa...
RE: Is that metal strip on the edge of my roof actually necessary?
My place was built in ‘82, no drip edge either. I’ve had to replace a couple fascia boards over the years, but honestly, I think clogged gutters and ice dams did most of the damage. I’m in upstate NY, so winters are roug...
RE: Roof Dramas: Shingles vs. Metal After Heavy Rain
I went back and forth on the rigid foam too, mostly because of the cost. Ended up skipping it and just beefed up the blown-in insulation, plus a vapor barrier. Honestly, attic temps didn’t change much, but I did notice l...
RE: Roofing roulette: whose warranty saves the day?
Had a similar runaround myself. Our roof leaked after a heavy snow melt, and the warranty company tried to pin it on "poor attic ventilation," even though they'd cleared everything during installation. Like you, I got an...
RE: finally found an underlayment that lasts - what's your experience?
I feel you on the corners - my EPDM install is about 8 years old now, and the edges definitely have that "DIY weekend warrior" vibe. But honestly, the underlayment beneath it has been a lifesaver. Went with a mid-range s...
RE: Is it true tile roofs are basically maintenance-free?
Honestly, I've found the same thing with my own tile roof. When we first moved in, the previous owner had installed zinc strips and swore it would keep moss away for years. But within two seasons, I noticed moss creeping...
RE: LOOKING FOR GOOD PLACES TO BUY METAL ROOFING SHEETS
Yeah, totally get where you're coming from. When I redid my shed roof, I went with a more budget-friendly galvalume option. Honestly, three years in and it's holding up fine - even after a couple nasty hailstorms. Someti...
RE: Eco-friendly roof upgrades that won't break the bank
Creeping thyme is a great call - I tried it myself on a small test patch a couple years back, and it was surprisingly hardy through winter. Plus, the fragrance when you step out onto the roof is a nice bonus. I did exper...
RE: Just got a roof inspection PDF that's straight outta sci-fi
Interesting to hear drones are working out for you. Had a drone inspection done last spring myself, and while the images were impressive, I found the inspector actually missed some soft spots in the plywood that I later ...
RE: how hot is too hot when welding TPO roofing?
Yeah, humidity can definitely be a sneaky culprit. When we had our TPO roof done, the installers waited out a rainy week to avoid moisture issues. Installer said moisture trapped during welding could cause weak seams or ...