Roofing discussions and local services.
Discussion activity
Topics and replies this member has contributed.
RE: Switching from RO to UF membranes made my life way easier
- Gotta say, I’m not totally sold on ditching RO for UF, at least not everywhere. - In my area (hard water central), UF just doesn’t cut it for mineral buildup. I tried switching a couple years back - figured less hass...
RE: Composite Shingles vs. Asphalt: Which Would You Trust Over Your Head?
- Seen the same thing with synthetics - if you get a big wind before shingles go on, it’s a gamble. Had one job where half the underlayment was flapping like a flag after a thunderstorm. Felt isn’t perfect, but it usuall...
RE: Clearing roof mess: DIY or hire a pro?
DIY vs. pro for roof cleanup? Here’s my two cents, especially for our PNW crowd: - Couldn’t agree more. I’ve seen every “miracle” guard and mesh out there, and most end up being more hassle than help. Fir needles are l...
RE: Clearing roof mess: DIY or hire a pro?
- North slopes are always trouble, especially with big trees nearby. Shade and needles just keep things damp - prime spot for moss and rot. - Zinc strips can help, but only if there’s enough rain to wash the runoff down ...
RE: If underlayments had a race: which one would cross the finish line last?
- That double layer idea isn’t as wild as it sounds, honestly. - In Texas, I’ve seen folks do peel-and-stick under synthetic just for extra peace of mind - especially on low-slope roofs or spots that get hammered by su...
RE: Roof upkeep through the seasons - did you see this?
- Seen this a lot on rolled roofing, especially where winters are rough. Even with solid prep, those hybrid patches just don’t seem to have the grip long-term, at least not like hot-applied. - I’ve noticed edge lift is...
RE: Trying to budget out a CertainTeed roof - any tips?
- Landmark Pro does have nicer colors, true, but from my experience after storms, the difference isn't just aesthetics. - Seen Landmark Pro hold up slightly better against hail impacts and wind uplift over the years - es...
RE: How tricky is too tricky when fixing modern gadgets?
Yeah, waterproofing can be a pain - especially when you're dealing with storm-damaged gear. Glue and seals never seem to hold up like the old-school methods did. Ever try replacing a gasket only to find it impossible to ...
RE: Best ways to protect home from extreme weather combo?
Good suggestions, especially reinforcing garage doors - seen too many of those buckle under pressure. A few more things I'd add from experience: - Trim back any large branches or trees close to your house. Had a neighbo...
RE: Will new solar panels mess up my old roof?
Definitely agree with this. Also keep in mind that panels can protect shingles from UV and weather wear, but installation itself can cause minor damage or leaks if not done carefully...seen it happen a few times.
RE: Is it true tile roofs are basically maintenance-free?
Copper strips can definitely help, but they're not a silver bullet. A few things I've noticed from experience: - Placement slightly below the ridge line usually gives better coverage, especially if your roof slope isn't...
RE: How tricky is too tricky when fixing modern gadgets?
Couldn't agree more. I've dealt with storm damage repairs for years, and honestly, the simpler tools have saved me more times than I can count. Had a similar experience recently - was helping a homeowner patch up some si...
RE: Commercial Roofs and Fire Safety: TPO vs EPDM
Good shout on insurance - seen plenty of folks overlook that step. EPDM usually works out fine, but insurers can be picky. Quick check now saves headaches later... trust me.
RE: Quick fix or redo: dealing with damaged aluminum flashing
- Agreed, patching aluminum flashing is usually just kicking the can down the road. - Had a client once who insisted on patching repeatedly - ended up costing way more in labor and headaches than just doing it right the ...
RE: Is It Just Me or Do Underlayments Never Last as Long as Promised?
- Good points overall, but I'd argue that sometimes the materials really are part of the problem. - Had a client last year who kept having moisture issues even after fixing leaks and ventilation. Turns out the underlayme...