Roofing discussions and local services.
buddyh67
Discussion activity
Topics and replies this member has contributed.
RE: just read about roof issues popping up after winter - are you checking yours?
I get what you mean - cellulose can really mask moisture issues until it’s pretty far along. I’ve seen fiberglass do the same, though, just in a different way. I’m not totally sold on the “natural” insulations being any ...
RE: Eye and hand protection: disposable vs. reusable gear?
That lines up with what I’ve found - those thin nitrile gloves are just too fragile for anything rough. I’ve torn through them in minutes pulling up old carpet tacks or scraping paint. The heavier-duty ones last a bit lo...
RE: How often do you actually get your business roof checked?
I get the urge to check every spring, but honestly, I don’t think yearly pro inspections are always necessary unless your roof’s older or you’ve had storm damage. I’ve got a 12-year-old asphalt shingle roof in the Midwes...
RE: Would tile roofs survive a harsh winter up north?
I hear you on the shingle headaches - mine barely made it through last winter without a patch job. Ice dams are brutal, and I’m always nervous about leaks around the chimney too. I’ve looked into metal and synthetic as w...
RE: Just got a roof inspection PDF that's straight outta sci-fi
Those inspection PDFs can make you feel like your roof’s about to launch into orbit. I had one list “imminent failure” for a cracked vent boot - fixed it with a $5 part and some elbow grease. Sometimes the language is sc...
RE: finally found an underlayment that lasts - what's your experience?
I get where you’re coming from about felt holding up in rough weather - especially if it’s installed right and you’re not cutting corners. But I’ve actually had the opposite experience with synthetics on my place (asphal...
RE: Roof Dramas: Shingles vs. Metal After Heavy Rain
I’ve seen both in my neighborhood - metal definitely sheds snow and ice faster, which seems to help with ice dams. Composite holds up well, but once you get a serious freeze-thaw cycle, the seams can still get packed wit...
RE: LOOKING FOR GOOD PLACES TO BUY METAL ROOFING SHEETS
Mixing profiles is a headache - been there once, and I’ll never do it again. I had a spot where two slightly different panels met, and it was always the first place to drip after a heavy rain. Ended up having to run buty...
RE: Finally tackled that metal edging thing on my roof
I feel your pain on that one. A couple of years ago, I decided to replace some old metal edging along the roofline myself - seemed straightforward enough at the time. I figured, why pay extra when it's just a strip of me...
RE: how much does fixing up after a big storm usually set you back?
Funny you mention that... I asked my insurance rep about discounts after installing impact-resistant shingles, and they acted like I'd discovered some hidden cheat code. Got a modest discount - nothing huge, but hey, eve...
RE: Roofing roulette: whose warranty saves the day?
Couldn't agree more with this point. I've had my fair share of warranty headaches too. A couple of years ago, we installed a new roof - high-quality shingles, reputable contractor, the whole nine yards. Felt pretty confi...
RE: LOOKING FOR GOOD PLACES TO BUY METAL ROOFING SHEETS
Good call on the AZ50 panels - I had a similar experience. Installed mine about 7 years ago in a pretty damp region, and they're holding up surprisingly well. I agree that investing in quality fasteners and proper sealin...
RE: finally found a roofing company that didn't rip me off
Copper mesh really can be a game changer long-term. I went stainless steel myself due to budget, but seeing my neighbor's copper mesh age gracefully over the years... gotta admit, sometimes I second-guess my choice. Good...
RE: best way to attach metal panels securely without visible screws?
Hidden clips can give a really nice finish, but I agree they're not always straightforward. I've found that a lot comes down to planning for thermal expansion from the get-go - allowing adequate spacing and movement is k...