Roofing discussions and local services.
andrewr54
Discussion activity
Topics and replies this member has contributed.
RE: Weighing the pros and cons: full roof removal vs. just adding a new layer
Couldn’t agree more about the moisture and heat issues - double layers are a recipe for hidden rot, especially if you’re in a humid spot. I’ve seen plywood decking go soft way faster under two layers. Plus, you can’t rea...
RE: When sparks fly: imagining a wildfire-proof neighborhood
I get the appeal of spray foam for those weird corners, but I’m always a little wary about using it in wildfire zones. Closed-cell foam can be a fire accelerant if things go sideways, and I’ve seen cases where it gave of...
RE: Weighing the pros and cons: full roof removal vs. just adding a new layer
I hear you on the moisture worries, but honestly, a lot of those issues come down to how well the installer preps the old surface. If you’ve got a solid, dry deck and the right underlayment, a single recover can work jus...
RE: Clearing roof mess: DIY or hire a pro?
I get where you’re coming from about hiring a pro, but I think folks underestimate how much they can do themselves if they’re careful and know what to look for. I’ve inspected a lot of roofs after people have “ruined” th...
RE: Quick fix or redo: dealing with damaged aluminum flashing
Couldn’t agree more with this. I’ve seen too many “quick fixes” where folks just slap some goop on corroded metal and hope for the best - never ends well. But if you actually clean, dry, and prep the area, butyl tape or ...
RE: Did you know shingles get layered like fish scales?
Those “fish scale” shingles really do a number on hiding what’s underneath, and I see that all the time during inspections. People are often surprised how much roof issues can lurk right below the surface - layered just ...
RE: Is that metal strip on the edge of my roof actually necessary?
Couldn’t agree more about the weird weather being the real culprit. I’ve inspected plenty of homes where folks skipped the drip edge, thinking their steep roof would be enough. But water finds a way - capillary action is...
RE: Figuring out roof support: choosing between rafters and trusses
That’s the thing with trusses - people assume you can just slap a few boards up there and suddenly it’s a storage space, but the engineering doesn’t work like that. I’ve seen folks overload those bottom chords with boxes...
RE: Roofing near the ocean - did you know salt air eats metal?
I get the hesitation with composites, but honestly, some of the newer high-grade polymer fasteners are holding up better than folks expect. I’ve seen them on a few coastal jobs - no rust, no staining, and they don’t snap...
RE: Ventilation in new builds - are we overlooking something important?
I see this all the time - folks throw smart fans or fancy gadgets at the problem, but if the building envelope isn’t tight, you’re just moving air from one leak to another. I’ve tested plenty of new builds with a blower ...
RE: Solar attic fan install was supposed to be easy... right?
I’m with you on the “trust but verify” approach - seen way too many attic fans installed with just a bead of caulk and crossed fingers. I’ve actually found water tracking sideways under membranes after a wind-driven rain...
RE: Solar attic fan install was supposed to be easy... right?
You're spot-on about the soffit vents - seen way too many attics with blocked or painted-over vents that choke airflow. Even the best solar fan won't do much if air can't circulate properly. And yeah, symmetry might look...
RE: Finally got my attic temps under control - here's what worked
Yeah, spray foam can be a real game changer, especially around tricky spots like skylights or dormers. I've inspected plenty of attics where rigid foam was clearly forced into awkward spaces - gaps everywhere, thermal br...