Notifications
Clear all

Best ways to insulate a modified bitumen roof?

235 Posts
224 Users
0 Reactions
2,236 Views
Posts: 7
(@streamer88)
Active Member
Joined:

Closed-cell foam does wonders for thermal, but yeah, moisture can be tricky. We did a similar setup on a commercial job last year—ended up adding a vapor barrier and some passive vents. No issues yet, fingers crossed...

Reply
Posts: 12
(@mechanic20)
Active Member
Joined:

Did you notice any condensation issues before adding the passive vents? I'm planning something similar, but wondering if venting alone is enough or if I should consider a dehumidifier setup too...

Reply
summit_martinez
Posts: 13
(@summit_martinez)
Active Member
Joined:

Didn't really notice condensation issues beforehand, but honestly... passive vents alone might not cut it if your area's humid. Ever checked your attic space in winter? Could be worth a peek before dropping cash on a dehumidifier setup.

Reply
Posts: 7
(@charlespoet)
Active Member
Joined:

"Ever checked your attic space in winter? Could be worth a peek before dropping cash on a dehumidifier setup."

Good call on checking the attic first. Last winter, I inspected a place where the homeowner had condensation dripping from the ceiling—thought it was a roof leak. Turns out, poor insulation and lack of airflow were causing moisture buildup, especially around recessed lights and vent pipes. Passive vents alone didn't do much there either. Sometimes just tweaking insulation and sealing gaps can save you from investing in pricey equipment you might not even need...

Reply
philosophy_donald
Posts: 8
(@philosophy_donald)
Active Member
Joined:

Modified bitumen roofs can be tricky—are you dealing with a vented attic underneath or is it a sealed setup? Seen plenty of condensation issues come from misunderstanding the roof system. Air sealing gaps helps, but have you checked if there's enough insulation depth overall?

Reply
Page 8 / 47
Share:
Scroll to Top